| Sector | abcAir Transport | Tender Value | INR 12.05 Lakhs approx. | Location | Telangana - India | Ref.No | 71307548 | Closing Date | 08 - May - 2024 | | | Supply of T Slot Cutters and Taps - Hss T-slot Cutter Head Dia 11 Mm X Width 4 Mm X Shank Dia 10 Mm X Total Length Min 50 Mm Conforming to is 2668tool Type-n Make Addison/ Dormer/ Sandvik/ Iscar/ Kennametal/ Walter/ Seco/ Titex/yg/forbes-tottem, Hss T-slot Cutter Head Dia 21 Mm X Width 9 Mm X Shank Dia 12 Mm X Total Length Min 70 Mmconforming to Is2668 Tool Type-n Make Addison/ Dormer/ Sandvik/ Iscar/ Kennametal/ Walter/ Seco/ Titex/yg/forbes-tottem, Hss T-slot Cutter Head Dia 32 Mm X Width 14 Mm X Shank Dia 25 Mm X Total Length Min 85 Mm Conforming to Is2668 Tool Type-n Make Addison/ Dormer/ Sandvik/ Iscar/ Kennametal/ Walter/ Seco/ Titex/yg/forbes-tottem, Hss ( M 42-hss Material with 8 % Cobalt) is 6175 Ground Thread Machine Taps with Spiral Flutes to Provide Smoth Entry and Exit to Eleminate Burr Folding, Up to 46 Hrc Sizem 2.5 X 0.45 Mm Class 6h Makeaddison/ Dormer/ Sandvik/ Iscar/ Kennametal/ Walter/ Seco/ Titex/yg/forbes-tottem, H.s.s(m2) Ground Thread Hand Tap, set of 2 Or 3 Pieces Sizem5.0x0.5, tolerence Classhmake Addison/ Dormer/ Sandvik/ Iscar/ Kennametal/ Walter/ Seco/ Titex/yg/forbes-tottem, H.s.s(m2) Ground Thread Hand Tapset of 2 Or 3 Pieces Sizem6.0x0.5, tolerence Class6h, makeaddison/ Dormer/ Sandvik/ Iscar/ Kennametal/ Walter/ Seco/ Titex/yg/forbes-tottem, Hss(m2) Ground Thread Hand Tapset of 2 Or 3 Pieces Sizem80x05tolerence Class6hmakeaddison/ Dormer/ Sandvik/ Iscar/ Kennametal/ Walter/ Seco/ Titex/yg/forbes-tottem, Hss(m2) Ground Thread Hand Tap Set of 2 Or 3 Pieces Sizem10x05tolerence Class6hmake Addison/ Dormer/ Sandvik/ Iscar/ Kennametal/ Walter/ Seco/ Titex/yg/forbes-tottem, Hss(m2) Ground Thread Hand Tapset of 2 Or 3 Pieces Sizem10x1 Tolerence Class6hmakeaddison/ Dormer/ Sandvik/ Iscar/ Kennametal/ Walter/ Seco/ Titex/yg/forbes-tottem, Hss(m2) Ground Thread Hand Tap Sizem8 0.75 Tolerence Class6hmakeaddison/ Dormer/ Sandvik/ Iscar/ Kennametal/ Walter/ Seco/ Titex/yg/forbes-tottem, Solid Carbide End Mill Ball Nose Dia 4.0 Mm with Parallel Shank Helix Angle 38-45 Deg, to Cut the Material Hardness Up to 45 Hrc Sizedia. 4.0 Mm, Shank Dia. 6.0 Mm Flute Length6 Mmradius2.0 Mm Total Length65 Mmtolerance on Flute Length0.5d, tolerance on Total Length, Qty 130 |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|